TM 5-3805-293-23-3
0157
CLEANING AND INSPECTION
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance (WP 0346).
2. Clean and inspect all electrical components IAW Electrical General Maintenance (WP 0347).
END OF TASK
INSTALLATION
000157
N OT E
Install wires as tagged during removal.
1. Install sensor harness (Figure 1, Item 1) on transmission (Figure 1, Item 12).
2. Install cover (Figure 1, Item 7), two washers (Figure 1, Item 6), and bolts (Figure 1, Item 5) on transmission
(Figure 1, Item 12).
3. Connect sensor harness plug (Figure 1, Item 3) to filter harness (Figure 1, Item 4).
4. Install clamp (Figure 1, Item 10) on sensor harness (Figure 1, Item 1).
5. Install bolt (Figure 1, Item 11) on clamp (Figure 1, Item 10).
6. Connect transmission intermediate speed sensors 1 & 2 (WP 0150).
7. Connect transmission input speed sensor (WP 0149).
8. Connect transmission output speed sensors 1 & 2 (WP 0148).
9. Install 11 new tiedown straps (Figure 1, Item 2) on sensor harness (Figure 1, Item 1).
10. Connect rear chassis wiring harness (Figure 1, Item 9) to sensor wiring harness (Figure 1, Item 8).
END OF TASK
FOLLOW-ON TASKS
000157
Install cooling module (WP 0049).
END OF TASK
END OF WORK PACKAGE
0157-3/(4 blank)
