TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Front Windshield Wiper
9. Turn RH door wiper/washer con- Front Windshield Wiper Returns to
Does Not Operate Prop-
trol to PARK position (TM 5-3805- Park Position - Proceed to Test Step
erly - Continued
293-10).
14.
Front Windshield Wiper Does Not
Return to Park Position - Replace
front windshield wiper motor (WP
0260).
Disconnect R-C33 (WP 0009, Figure
371) from RH door wiper washer
switch (WP 0274).
Connect R-C33 (WP 0009, Figure
371) on front windshield wiper washer
switch (WP 0274).
Connect R-C32 (WP 0009, Figure
363) on RH door wiper washer switch
(WP 0274).
Connect P-C59 (WP 0009, Figure
375) on front washer motor (WP
0261).
Inspect fuse F20. If fuse is open (TM
5-3805-293-10), install new fuse F20
on fuse box.
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 10.
10. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
Front Wiper Does Not Work in One
11. Turn front windshield wiper/
Or More Positions Or Does Not
washer control to LOW, HIGH,
Return To Park - Repeat trouble-
and PARK position (TM 5-3805-
shooting from beginning.
293-10).
Front Wiper Works In Low, and
High Position, and Returns to Park
- Troubleshooting complete.
Test Step 14. Test for Shorted Front
Washer Motor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-293-10).
2. Connect cab lower wiring harness
connector P-C59 (WP 0009, Fig-
ure 375) on front washer motor
(WP 0261).
0024-15
