TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
18. One or Both Blackout
Tail Lights Do Not Oper-
or Greater - Replace fuse F38.
ate - Continued
Connect the rear chassis wiring har-
ness connector FA-C22 (WP 0009,
Figure 47) to cab lower wiring harness
connector P-C69 (WP 0009, Figure
46) (WP 0266).
Connect the control indicator harness
connector PE-C11 (WP 0009, Figure
287) to cab lower wiring harness con-
nector P-C11 (WP 0009, Figure 286)
(WP 0283).
Connect the rear lamps harness con-
nector AG-C20 (WP 0009, Figure 311)
to rear chassis wiring harness con-
nector FA-C29 (WP 0009, Figure 310)
(WP 0188).
Connect the connector AG-C15 (WP
0009, Figure 341) to right tail light
(WP 0177).
Connect the connector AG-C16 (WP
0009, Figure 400) to left tail light (WP
0177).
Proceed to step 3.
3. Turn battery disconnect switch to
One or Both Blackout Tail Lights
the ON position and control indi-
Do Not Operate - Repeat trouble-
cator switch to position B.O.
shooting from the beginning.
DRIVE (TM 5-3805-293-10), and
Both Blackout Tail Lights Operate -
verify both blackout tail lights
Troubleshooting complete.
operate.
0023-113