TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
15. Left Position Light and/
Resistance 5.0 Ohms or Greater -
or Tail Light Does Not
Replace cab upper wiring harness
Operate - Continued
(WP 0265).
Connect the LH position relay (WP
0009, Figure 336) to LH position relay
socket (WP 0009, Figure 337).
Connect the rear chassis wiring har-
ness connector FA-C41 (WP 0009,
Figure 21) to circuit breaker box wiring
connector R-C5 (WP 0009, Figure 22)
(WP 0234).
Connect AG-C10 (WP 0009, Figure
399) to left tail light (WP 0177).
Connect AG-C3 (WP 0009, Figure
334) to left tail light (WP 0177).
Connect AZ-C5 (WP 0009, Figure
391) to left headlight (WP 0197).
Proceed to step 5.
5. Turn control indicator switch to
Left Position Light and/or Tail Light
position SER. DRIVE and Park
Do Not Operate - Repeat trouble-
(TM 5-3805-293-10). Visually
shooting from the beginning.
check if left tail light and left posi-
Left Position Light and/or Tail Light
tion light operate.
Operate - Troubleshooting complete.
Test Step 9. Check for Faulty Cir-
cuit Breaker.
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
2. Disconnect the rear chassis wir-
ing harness connector FA-C41
(WP 0009, Figure 21) from circuit
breaker box wiring connector R-
C5 (WP 0009, Figure 22) (Figure
234).
3. Turn battery disconnect switch
and ignition switch to the ON posi-
tion (TM 5-3805-293-10).
0023-97
