TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Front Left Turn Signal
5. Using digital multimeter, test for
Voltage Pulsing and Peaks
Does Not Operate - Con-
voltage between connector CL-
Between 18 and 26 Volts - Replace
tinued
C26 (WP 0009, Figure 293) termi-
front lighting harness (WP 0196).
nal 1 and CL-C24 terminal 2
Connect the connector AZ-C3 (WP
(Gnd). Voltage should be pulsing
0009, Figure 389) to left turn signal
18 to 26 volts.
(WP 0197).
Proceed to step 4.
Voltage Less Than 18 Volts -
Proceed to step 6.
6. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
7. Disconnect harness connector
CL-C18 (WP 0009, Figure 294)
from harness connector P-C61
(WP 0009, Figure 295).
8. Turn battery disconnect switch
and ignition switch to the ON posi-
tion (TM 5-3805-293-10).
0023-50
