TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2298-06 Right Front Drive
4.
Using a digital multimeter, test for
No Continuity - Proceed to step 5.
Pump Reverse Control Sole-
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
noid Current Above Normal -
nal 52 and all other circuits in P-
harness (WP 0266).
Continued
C35 (WP 0009, Figure 53). There
Connect AC-C5 (WP 0009, Figure 78)
should be no continuity.
on FA-C37 (WP 0009, Figure 79) (WP
0199).
Connect AX-C1 (WP 0009, Figure
100) on AC-C1 (WP 0009, Figure
101).
Connect AX-C4 (WP 0009, Figure
108) on right drive pump reverse sole-
noid connector (WP 0009, Figure 109)
and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 7.
5. Using a digital multimeter, test for
No Continuity - Proceed to step 6.
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
nal 52 (WP 0009, Figure 53) and
harness (WP 0266).
all circuits in P-C37 (WP 0009,
Connect AC-C5 (WP 0009, Figure 78)
Figure 55). There should be no
on FA-C37 (WP 0009, Figure 79) (WP
continuity.
0199).
Connect AX-C1 (WP 0009, Figure
100) on AC-C1 (WP 0009, Figure
101).
Connect AX-C4 (WP 0009, Figure
108) on right drive pump reverse sole-
noid connector (WP 0009, Figure 109)
and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 7.
0014-109