TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2188-05 Left All-Wheel Drive
7. Check for Active code 2188-05 or
Code 2188-05 Remains Active - Pro-
(AWD) Clutch Forward Sole-
2188-06 in All Wheel Drive 120M
ceed to Test Step 2.
noid Current Below Normal -
ECM (WP 0006).
Code 2188-05 Becomes Inactive
Continued
and 2188-06 Becomes Active -
Remove jumper wire from AF-C6 ter-
minal 1 and terminal 2 (WP 0009, Fig-
ure 80).
Replace left AWD clutch forward sole-
noid (WP 0248).
Proceed to step 8.
8. Using the MSD (WP 0006), select
2188-05 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2188-05 is not active.
2188-05 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test for Open Clutch
Drive Solenoid Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Remove jumper wire from AF-C6
terminal 1 and terminal 2 (WP
0009, Figure 80).
3. Remove rear front frame cover
from machine (WP 0224).
4. Disconnect clutch drive solenoid
AF-C3 harness connector (WP
0009, Figure 51) from cab lower
wiring P-C34 harness connector
(WP 0009, Figure 52) (WP 0200).
5. Connect jumper wire between P-
C34 terminal 3 and terminal 22
(WP 0009, Figure 52).
6. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
7. Check for Active code 2188-05 or
Code 2188-05 Remains Active - Pro-
2188-06 in All Wheel Drive 120M
ceed to Test Step 3.
ECM (WP 0006).
Code 2188-05 Becomes Inactive
and 2188-06 Becomes Active -
Remove jumper wire from P-C34 ter-
minal 3 and terminal 22 (WP 0009,
Figure 52).
Replace clutch drive solenoid harness
(WP 0200).
Proceed to step 8.
0013-55