TM 5-3805-263-14&P-3
2. Remove strainer and magnet assembly. Wash in
6. Remove strainer and magnet assembly. Wash in
clean non-flammable solvent. Clean magnets with a
clean non-flammable solvent. Clean magnets with a
cloth, stiff brush or pressure air.
cloth, stiff brush or pressure air.
3. Install clean strainer and magnets. Inspect gasket.
7. Install clean strainer and magnets.
Use new gasket if necessary.
8. Inspect gasket. Use a new gasket if necessary.
4. Install gasket and cover.
Clean and install cover and gasket.
9. Add oil to bring level to the OPERATING RANGE on
5. Remove upper strainer cover and gasket.
dipstick.
10. Start engine and inspect for leaks. Stop engine.
5-45
