TM 5-3805-261-34
BRAKES MAINTENANCE. (cont)
6-14.
Air Compressor Governor. (Sheet 4 of 6)
DISASSEMBLY (cont)
10.
Turn air compressor governor (30, Figure 6-62)
right side up.
11.
Remove valve (25) and valve spring (26).
12.
Remove and discard two preformed packings (27)
from piston (28).
13.
Remove two filters (29) from air compressor
governor (30).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.
Lubricate air compressor governor (30) and piston
(28) with grease.
2.
Install two filters (29) in air compressor governor (30,
Figure 6-62).
3.
Turn piston (28) upside down.
4.
Lubricate two new preformed packings (27) with
grease and install in piston (28).
5.
Drop valve (25) into place inside bottom of piston
(28).
6.
Install valve spring (26) into bottom of piston (28)
with small end against valve (25). Dress down until
the larger coiled end snaps into the groove inside
piston (28). Turn piston (28) upright.
Go to Sheet 5
6-72
Figure 6-62.
