TM 5-3805-261-34
APPENDIX E
E-2.
TORQUE LIMITS
e.
TABLE E-5. TORQUE LIMITS FOR PIPE FITTINGS. Sealing is the basis for acceptance of a pipe thread
joint. Apply MIL-A-12352A (CE) thread sealant to all pipe threads except:
(1)
Pipe threads in hydraulic components for which MIL-S-224730 is used.
(2)
On grease fittings.
Insure that no thread damage occurs from too high a torque. Also ensure that joint can be disassembled after sealant has
set.
TABLE E-5.
TORQUE LIMITS FOR PIPE FITTINGS
f.
TABLE E-6. TORQUE LIMITS FOR WORM DRIVE BAND TYPE HOSE CLAMP. Inspect torque on new hose
within 10 minutes. Torque should exceed minimum torque after one hour.
TABLE E-6.
TORQUE LIMITS FOR WORM-DRIVE, BAND TYPE HOSE CLAMP
E-5/(E-6 blank)