TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
17-6.
Scarifier Cylinder. (Sheet 3 of 4)
DISASSEMBLY
8.
Separate crown (14) and rod (15,
Figure 17-34).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.
Install crown (14) on rod (15,
Figure 17-34).
2.
Using clean hydraulic fluid,
lubricate new seals (11 thru 9,
Figure 17-33).
3.
Using seal installer, install new
seals (11 thru 9) on head (8).
Lip on center seal (10) faces
inside head (8). Lip on outside
seal (9) faces outside head (8).
4.
Install new preformed packing
(13) and new ring (12) on head
(8).
5.
Install items 13 thru 8 as an
assembly on rod (15, Figure
17-32).
Go to Sheet 4
Figure 17-34.
17-23
