TM 5-3805-261-23-1
CENTERSHIFT LINES, FITTINGS, AND HOSES REPLACEMENT - CONTINUED
0226 00
REMOVAL - CONTINUED
14.
Remove hose assembly (30), O-ring (58), connector
(57), and preformed packing (56). Discard preformed
packing.
15.
Remove hose assemblies from machine.
56
57
58
30
397-777
CLEANING AND INSPECTION
Clean and inspect all parts in accordance WP 0020 00.
INSTALLATION
1.
Position hose assemblies on machine.
2.
Install new preformed packing (56), connector (57), new O-ring (58), and hose assembly (30).
3.
Install new preformed packing (54), elbow (55), new O-ring (48), and hose assembly (28).
4.
Install bolt (46), washer (47), two clips (50), and nut (49).
5.
Install two clips (51), washer (52), and bolt (53).
38
42 37
41
6.
Install clamp (43), washer (44), and bolt (45).
39 40
7.
Install clamp (41), washer (40), bolt (39), clamp (38),
washer (37), and bolt (42).
NOTE
Install toolbox if removed (WP 0202 00).
397-774
0226 00-7
