TM 5-3805-261-23-1
CIRCLE DRIVE MOTOR HOSES AND FITTINGS REPLACEMENT - CONTINUED
0225 00
INSTALLATION - CONTINUED
12.
Install new preformed packing (3), connector (4), new
O-ring (2), new preformed packing (5), connector (6),
and new O-ring (7).
13.
Install hose assemblies (1 and 8).
14.
Connect sideshift hoses (WP 0228 00).
1
15.
Connect blade lift hoses (WP 0222 00).
2
8
7
3
6
5 4
397-2373
16.
Check level of hydraulic tank and fill as necessary (WP 0216 00).
17.
Start engine (TM 5-3805-261-10).
18.
Operate control levers. Move system through at least five-full movements of travel to bleed air from system.
19.
Stop engine and check for leaks.
20.
Install left side front frame covers (WP 0179 00).
END OF WORK PACKAGE
0225 00-10
