TM 5-3805-261-23-1
BLADE TIP LINES, FITTINGS, AND HOSES REPLACEMENT - CONTINUED
0223 00
INSTALLATION
NOTE
Lightly lubricate all preformed packings with clean oil before installation.
1.
Install new preformed packing (66) and connector (65) to end of blade tip cylinder.
2.
Position hose assembly (53) to machine.
3.
Install new preformed packing (64) and connect hose assembly (53) to connector (65).
4.
Install new preformed packing (63) and elbow (62) on rod end of blade tip cylinder.
5.
Position hose assembly (54) on machine.
52
6.
Install new preformed packing (61) and connect hose
50
51
assembly (54) to elbow (62).
53
7.
Install two clamps (60) and bolts (59) on hose assem-
34
47
blies (53 and 54).
48
8.
Install new preformed packing (57) and elbow (56) on
49
circle drive swivel assembly.
9.
Install new preformed packing (55) and connect hose
assembly (54) to elbow (56).
35
47
10.
Install new preformed packings (50) and elbows (51)
58
49
on circle drive swivel assembly.
11.
Install new preformed packing (52) and connect hose
assembly (53) to elbow (51).
57
12.
Install two new preformed packing (49) and install
elbows (48 and 58) on circle drive swivel assembly.
56
13.
Position hose assemblies (34 and 35) on machine.
55
54
397-749
14.
Install two new preformed packings (47) and connect
hose assemblies (34 and 35) to elbows (48 and 58).
0223 00-9
