TM 5-3805-261-23-1
HEATER MAINTENANCE (CCE MACHINE) - CONTINUED
0212 00
DISASSEMBLY
1.
Loosen nut (31) and remove valve (32) from heater assembly (2).
2.
Remove and discard four tapping screws (33).
3.
Remove heater core (29) and seal (30). Discard seal.
NOTE
This procedure covers removal of the right side fan and motor assembly, resistor, and switch. Follow these
instructions for the left side fan and motor assembly, resistor, and switch.
4.
Loosen screw (35) and remove fan (34).
5.
Remove nut (25) and disconnect wire assembly (26).
6.
Disconnect wire assembly (24) from terminal of resistor (28).
7.
Remove two nuts (22) and motor (27) from bracket (23).
22
35
23
24
34
2
33
28
32
26
27
25
31
29
30
397-655
0212 00-3
