TM 5-3805-261-23-1
TRANSMISSION CONTROL CABLES REPLACEMENT - CONTINUED
0152 00
REMOVAL - CONTINUED
38.
Remove and discard three seals (68) and six rings (67)
67
68
57
66
39.
Remove retainer (57) and three preformed packings
(66) from cables (22, 23, and 33). Discard three pre-
formed packings.
40.
Remove cables (22, 23, and 33) from machine.
64
33 22
23
397-4122
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
61
1.
Position cables (22, 23, and 33) on machine.
2.
Install three new preformed packings (66) on cables
65
(22, 23, and 33) at transmission under left side of
engine compartment.
3.
Install retainer (57), six new rings (67), and three new
4.
Install three nuts (65) and rod ends (61).
397-4121
0152 00-10