TM 5-3805-261-23-1
GENERAL INFORMATION - CONTINUED
0001 00
SAFETY, CARE, AND HANDLING
0001 00
1.
Threat of Nuclear, Biological, and Chemical (NBC) Contamination.
a.
The 130G Series Grader incorporates a CARC painted exterior. Materials used in the machine are metal, rubber,
plastic, fabric, and glass.
In the event of NBC contamination, decontaminates for these surfaces and materials are listed in FM 3-5, NBC
b.
Decontamination. For decontamination procedures, refer to FM 3-7, NBC Field Handbook.
2.
Electromagnetic Pulse (EMP) Exposure. Components designated as EMP susceptible may be damaged by EMP expo-
sure. If machine is exposed to an EMP incident, verify proper operation and repair as necessary.
3.
General Safety Considerations.
a.
Read and become familiar with all general safety warnings associated with maintenance of the grader. Refer to the
Warning Summary at the front of this manual.
b.
Perform all maintenance, unless otherwise specified, with ALL equipment (blade and scarifier) lowered to the
ground, transmission in N (Neutral) and locked, parking/emergency brake applied, engine off, and master battery
disconnect switch in OFF position. If any hydraulic system line or fitting is to be disconnected, release hydraulic
system pressure before proceeding (WP 0020 00).
c.
END OF WORK PACKAGE
0001 00-3
