TM 5-3805-261-20
STEERING MAINTENANCE. (cont.)
11-8.
Combination Valve. (Sheet 2 of 7)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assembly (1, Figure 11-
56).
2.
Remove elbow (2) and preformed packing
(3). Discard preformed packing (3).
3.
Disconnect hose assembly (4, Figure 11-57)
from bottom of valve.
4.
Remove elbow (5) and preformed packing
(6). Discard preformed packing (6).
5.
Disconnect hose assembly (7).
6.
Remove elbow (8) and preformed packing
(9). Discard preformed packing (9).
7.
Disconnect hose assembly (10).
8.
Remove elbow (11) and preformed packing
(12). Discard preformed packing (12).
Figure 11-56
Go to Sheet 3
Figure 11-57
11-42
