TM 5-3805-261-20
TRANSMISSION MAINTENANCE.
8-10.
Transmission Oil Filler and Oil Level Gage.
(Sheet 2 of 30
REMOVAL
1.
Remove bolt (1) and clamp (2, Figure 8-41).
2.
Remove bolt (3) and clamp (4).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
3.
Remove two bolts (5), washers (6), tube
assembly (7) and seal (8, Figure 8-42).
Discard seal (8).
4.
Remove gage (12, Figure 8-44).
5.
Remove bolt (9), lockwasher (10) and cap
(11, Figure 8-43).
6.
Remove bolt (13) and washer (14)from clip
(15).
7.
Slide clip (15) on hose (16).
8.
Remove two bolts (17), lock washers (18),
tube assembly (19) and gasket (20, Figure
8-44). Discard gasket (20). Remove all
gasket material from mounting surfaces.
CLEANING
Clean all parts. Refer to Chapter 2
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 8-44
Go to Sheet 3
Figure 8-41
Figure 8-42
Figure 8-43
8-41
