TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE. (cont)
7-80.
Headlights. (Sheet 2 of 3)
REMOVAL
NOTE
The
following
is
a
maintenance
procedure for the left headlight. The
maintenance procedure for the right
headlight is identical.
1.
Remove nut (1), washer (2) and two
washers (3) (Figure 7-110) from top, front
exterior of cab. Support items 4 thru 11 as
an assembly while removing mounting
hardware.
2.
Remove two screws (4, Figure 7-111).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Disconnect two wire assemblies (5) at
terminals.
4.
Remove items 6 and 11 as an assembly.
DISASSEMBLY
1.
Remove screw (6), ring(7) and lamp (8,
Figure 7-112).
2.
Remove screw(9), molding(10) and ring
(11) from housing.
Figure 7-110
Figure 7-111
Figure 7-112
Go to sheet 3
7-190
