TM 5-3805-261-20
GAGES AND INDICATORS (NON-ELECTRICAL) MAINTENANCE. (cont.)
16-6.
Articulation Indicator Mechanism. (Sheet 3 of 6)
REMOVAL (cont.)
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
8.
Disconnect two wire assemblies (20) at
terminals from lamp assembly (24, Figure
16-8).
9.
Remove lock nut (21), lockwasher (22),
spacer (23) and lamp assembly (24) from
bracket (27).
10.
Remove two nuts (25), washers (26) and
bracket (27).
11.
Remove nut (28), washer (29), bolt (30)
and bracket (31).
12.
Remove nut (32), washer (33) and bolt (34,
Figure 16-9).
13.
Remove nut (35), washer (36) and bracket
(38).
14.
Remove cotter pin (39) and pin (40) from
front, left side of rear frame.
15.
Loosen two nuts (52).
16.
Remove cable (41).
17.
Remove rod end (42) and nut (43, Figure
16-10).
18.
Remove cotter pin (44), pin (45), cotter pin
(46), pin (47) and rod (48).
19.
Remove lock nut (49), bolt (50) and lever
(51).
Figure 16-8.
Figure 16-9.
Go to Sheet 4
16-12
