TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL
HOURS
NOTE
82
After
Cutting Edge
and End Bits
If blade cutting edge or end bits are worn or damaged, notify
Unit Maintenance.
Obtain appropriate measuring device from Unit Maintenance
to measure cutting edge wear.
a. Inspect cutting edge for excessive Cutting edge is worn to within
wear, cracks, breaks, and loose or 3/4 in. of blade or is damaged,
missing mounting hardware.
or two or more mounting bolts
are missing.
b. Inspect both end bits of the blade End bit is worn down to blade
for cracks, breaks, loose or missing or damaged, or loose mount-
mounting hardware, and excessive ing hardware is evident.
wear.
a. Check right lift cylinder and hoses Class III leaks or damage that
83
After
Hydraulic
for damage or leaks.
would impair operation.
Cylinders
b. Check centershift cylinder
and Class III leaks or damage that
hoses for damage or leaks.
would impair operation.
c. Check sideshift cylinder and hoses Class III leaks or damage that
for damage or leaks.
would impair operation.
a. Check all circle drive components Damage to circle drive that
84
After
Circle Drive
for damage or debris. Remove would impair operation.
debris.
b. Check circle drive for damage or Class III leaks or damage that
leaks.
would impair operation.
Check scarifier frame, link rod, and Damage that would impair
85
After
Scarifier
teeth for excessive wear, damage, or operation or missing six scari-
missing components.
fier teeth, if required for mis-
sion.
a. Check drawbar and drawbar pivot Class III leaks or damage that
86
After
Drawbar
point for damage.
would impair operation.
b. Check all hoses and fittings for
leaks.
a. Check steering linkage for cracks, Cracks or distortion to steer-
87
After
Steering
distortion, or damage.
ing linkage that would impair
operation.
b. Check right front steering cylin- Class III leaks or damage that
der and hoses for damage or leaks. would impair operation.
0013 00-28
