TM 5-3805-261-10
ADVANCED OPERATION AND OPERATOR TIPS - CONTINUED
0006 00
TRAVELING AND EARTH MOVING OPERATIONS - CONTINUED
Grading on an "S" Curve - Continued
4.
Continue to grade.
397-963
Right-Hand Leveling
NOTE
During right-hand leveling, left lift cylin-
der will be vertical and right lift cylinder
will be slightly angled.
1.
Use the centershift cylinder to position the circle
approximately 8 in. (200 mm) to the left. Move the
centershift lock pin lever to the INDEX and RUN
position.
2.
Set the blade to cast material outside of the left rear
397-964
wheels.
3.
Set the blade horizontal at the desired depth of the cut.
397-965
0006 00-7
