1. Install new O-ring (Figure 52, Item 3) on transmission (Figure 52, Item 4).
2. Attach lifting brackets, sling, and lifting device to transmission.
3. Remove two bolts (Figure 52, Item 1) and stand (Figure 52, Item 2) from transmission (Figure 52, Item 4)
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Transmission weighs 1,900 lb (862 kg).
Figure 52. Transmission Stand.