WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity. Keep clear of heavy parts supported by lifting equipment.
Failure to follow this warning may result in death or injury to personnel.
N OT E
Weight of service brake assembly is 490 lb (222 kg.
Position lifting device under opposite servce brake to prevent tandem housing from
turning on axis point.
4. Attach two link brackets (Figure 3, Item 1), link bracket (Figure 3, Item 2), and lifting device to service brake
assembly (Figure 3, Item 5).
5. Remove 16 bolts (Figure 3, Item 4) and washers (Figure 3, Item 3) from service brake assembly (Figure 3,
6. Remove service brake assembly (Figure 3, Item 5) and O-ring (Figure 3, Item 6) from machine. Discard O-ring.
Figure 3. Service Brake.
END OF TASK