N OT E
Retain high-pressure fuel lines for fuel injector alignment during installation.
6. Remove six torx screws (Figure 2, Item 2) from fuel injector clamps (Figure 2, Item 3). Discard torx screws.
C AU T I O N
Fuel injectors must be reinstalled in original location in the cylinder head. Handle fuel
injector with care. Make a temporary identification mark on the fuel injector denoting
cylinder or position.
7. Carefully pry beneath six clamps (Figure 2, Item 3) and remove fuel injectors (Figure 2, Item 1) and clamps
from cylinder head (Figure 2, Item 4).
Figure 2. Fuel Injector.
8. Remove six sealing washers (Figure 3, Item 1) and O-rings (Figure 3, Item 3) from fuel injectors (Figure 3,
Item 2). Discard O-rings and sealing washers.
Figure 3. Fuel Injector Seals.