1. Turn engine start switch to ON position for two minutes (TM 5-3805-293-10).
2. Verify water separator (Figure 4, Item 1) is full of fuel. If water separator is not full of fuel, turn engine start
switch OFF, then turn engine start switch ON for two more minutes (TM 5-3805-293-10).
3. When water separator (Figure 4, Item 1) is full of fuel, start engine.
4. Check for any fuel leaks (TM 5-3805-293-10).
Figure 4. Water Separator and Primary Fuel Filter.
END OF TASK
END OF WORK PACKAGE