SERVICE BRAKE SYSTEM PRESSURE TEST
WARN I N G
Personal injury can result if machine move while testing. If machine begins to move
during test, reduce engine speed immediately and engage parking brake.
Sudden movement of machine or release of oil under pressure can cause injury to
persons on or near machine.
To prevent possible injury, perform procedure that follows before testing and adjusting
1. Park machine on hard, level surface (TM 5-3805-293-10).
2. Release hydraulic system pressure (WP 0218). Pump service brake pedal at intervals of one second on and
one second off for at least 110 applications.
3. Assemble two hoses.
Remove two dust caps (Figure 69, Item 1) from hose (Figure 69, Item 2).
Figure 69. Hose.