SPEED SENSOR TEST
WARN I N G
Front wheels may rotate during this test; keep personnel away. Failure to follow this
warning may result in injury or death to personnel.
N OT E
Operator must be present and seated in the cab during this entire test.
1. Start machine and run at low idle (TM 5-3805-293-10).
2. Install wheel lean lock bolt (Figure 53, Item 3) and nut (Figure 53, Item 1) on front axle (Figure 53, Item 2).
Hand tighten only.
3. Turn off parking brake (TM 5-3805-293-10).
Figure 53. Wheel Lean Lock Bolt.