TM 5-3805-293-23-1
0019
Table 1. Transmission Code (1471-02 to 1961-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1472-02 Steering Control
Position Sensor #2 Data
harness is shorted, replace rear chas-
Erratic, Intermittent or Incor-
sis wiring harness (WP 0188).
rect - Continued
Connect the cab lower wiring harness
Figure 71) (WP 0268).
Connect the cab lower wiring harness
118) to LH joystick connector J-1 (WP
0009, Figure 119) (WP 0282).
Proceed to step 3.
1472-02 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
1472-02 is not active.
1472-02 Code Not Active - Trouble-
shooting complete.
Test Step 6. Test for Shorted Cab
Lower Wiring Harness to Imple-
ment ECM.
continuity between cab lower wir-
ness is shorted, replace cab lower wir-
ing harness connector P-C39
ing harness (WP 0266).
Connect the rear chassis wiring har-
and all other terminals, and
machine ground. There should be
Figure 124) to transmission ECM J2
no continuity.
Proceed to step 2.
No Continuity - Replace implement 1
ECM (WP 0268).
Connect the rear chassis wiring har-
Figure 124) to transmission ECM J2
Connect the cab lower wiring harness
118) to LH joystick connector J-1 (WP
0009, Figure 119) (WP 0282).
Proceed to step 2.
1472-02 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
1472-02 is not active.
1472-02 Code Not Active - Trouble-
shooting complete.
0019-29