TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0615-14 Machine Articula-
0615-14 Code Active - Proceed to
tion Angle Sensor Special
0615-14 is active for the transmis-
Test Step 3.
Instruction - Continued
sion ECM or the Implement 1
0615-14 Code Not Active - Trouble-
ECM.
shooting complete.
Test Step 3. Check Sensor.
1. Verify articulation angle position
Articulation Angle Position Sensor
sensor 1 (left) is within specifica-
OK - Proceed to Test Step 4.
tions. Refer to Adjustment in (WP
Articulation Angle Position Sensor
0257).
Needs Adjustment - Adjust sensor
as directed (WP 0257).
Proceed to step 2.
0615-14 Code Active - Repeat trou-
Trans/Chassis 120M and verify
bleshooting from the beginning of this
0615-14 is active.
diagnostic code.
0615-14 Code Not Active - Trouble-
shooting complete.
Test Step 4. Calibrate Sensor.
1. Calibrate articulation angle posi-
Articulation Angle Position Sensor
tion sensor 1 (left). Refer to Cali-
Cannot Be Calibrated - Perform cali-
bration in (WP 0257).
bration procedure again. If sensor
cannot be calibrated, replace articula-
tion angle position sensor (WP 0257).
Proceed to step 2.
Articulation Angle Position Sensor
Calibrated OK - Proceed to step 2.
0615-14 Code Active - Repeat trou-
Trans/Chassis 120M and verify
bleshooting from the beginning of this
0615-14 is active.
diagnostic code.
0615-14 Code Not Active - Trouble-
shooting complete.
0017-63