Table 1. Preventive Maintenance Checks and Services (PMCS)
with Lubrication Information - Continued.
NOT FULLY MISSION
WARN I N G
If CBRN exposure is suspected, personnel wearing pro-
tective equipment must handle all air cleaner media. Con-
taminated filters must be handled using adequate
precautions and must be disposed of by trained person-
nel. Consult your CBRN Officer or CBRN NCO for appro-
priate handling or disposal procedures. Failure to follow
this warning may result in injury or death to personnel.
C AU T I O N
· Do not use compressed air at pressure greater than 30 psi
(207 kPa) to clean or dry filter element. Failure to follow
this caution may result in damage to filter element.
· Filter element must be completely dry before installation.
Failure to follow this caution may result in damage to
a. Loosen thumb screw (Figure
Filter missing if required for
27, Item 3) and open outside cab
air filter access cover (Figure 27,
b. Remove filter element (Figure
27, Item 1) and clean with either
pressurized air or nonsudsing
c. Rinse filter and allow to dry.
d. Inspect filter for damaged pleats
or a damaged seal. If filter is
damaged, replace filter.
e. Install filter element.
f. Close outside cab air filter
access cover (Figure 27, Item 2).