DISASSEMBLY AND ASSEMBLY
8. Put tool (A) in position on the top of the
9. Install bolts (10), that were used with the
lifting eyes, to hold the lifting bracket to
NOTE: The lifting eyes are used to remove the
Fasten a hoist to tool (A).
Remove bolts (1 1) that hold the transmis-
sion housing to the flywheel housing.
Remove nuts (12) that hold the differential
carrier to the bevel gear case. Install three
5/8-11 NC forcing screws in the differen-
tial carrier. Move the differential away from
the bevel gear case with the forcing screws.
Remove differential and transmission (13)
as a unit. Weight is 2000 lb. (907 kg).
Remove four bolts from the manifold at the
rear of the transmission.
Put the transmission and the differential in
position on tool (B).
Install four bolts to hold the transmission to
the bracket on tool (B).
Remove the hoist and tool (A) from the
Fasten a hoist and straps to the differential
Remove nuts (15) that hold differential
(14) to the transmission.
Remove differential (14). Weight of the
differential is 500 lb. (227 kg).