REMOVE DRIVE CHAINS
8B7554 Puller Assembly
a) remove rear wheels
b) remove axles
Drain the oil from the tandem housing.
Remove bolts (1) and cover (2) from the
top of the tandem housing. Remove bolts
(3) and cover (4) from each side of the
Turn the wheel spindle until the master link
of the chain is at the openings.
Remove cotter pins (5) from the master
Install tooling (A) on the master link as
6. Remove master link bar (6).
7. Remove the master link and tooling (A).
Turn the wheel spindle counterclockwise
while pulling drive chain (7) out of the
tandem housing. Weight of the drive chain is
50 lb. (23 kg).
Do Steps 1 through 8 for the other drive
DISASSEMBLY AND ASSEMBLY