DISASSEMBLY AND ASSEMBLY
FUEL INJECTION PUMP HOUSING
10. Install fuel rack (5) in the fuel injection pump
housing with the groove in the end of fuel rack
in alignment with the ear (tab) of the rack
bearing at the drive end of the fuel injection
11. Install timing pin from tooling(B). Engage the
timing pin in the center groove of the fuel rack.
Move the fuel rack in the direction of the arrow
to locate the center groove.
12. Install spacer (6).
13. Put the (slot) groove (8) in the gear segment
180° away from the groove (7) in the barrel.
When the fuel injection pump is installed,
groove (7) must engage the dowel (9).
14. Use tool (E) to install the fuel injection pump.
Installation is made easier by rotation of the
cam lobe away from the lifter assembly.