ENGINE
DISASSEMBLY AND ASSEMBLY
INSTALL FAN DRIVE AND SUPPORT
1. Fasten a hoist to the fan drive (1). Put the unit
in position on the timing gear cover and install
the lower two bolts (2) that hold it. Remove
hoist.
FAN DRIVE AND SUPPORT
TM 5-3805-263-14&P-2
2. Install line (3) and clip (4) on tank. Install the
other four bolts (5) on the fan adapter.
3. Install vee belts (6) on the pulleys. Make an
adjustment of the vee belts. See INSTALL
ALTERNATOR.
4. Fasten a hoist to the fan and adapter. Install
bolts to fasten the fan and adapter to the fan
drive. Remove hoist.
1-111