DISASSEMBLY AND ASSEMBLY
CENTERSHIFT LOCK CONTROL VALVE
REMOVE AND INSTALL CENTERSHIFT LOCK
1. Loosen the bleed valves and release the air pressure
in the tanks.
Do not disconnect any air lines from the centershift
lock control valve until the air pressure is zero.
Remove the cotter pin and pin (3) from linkage (4).
Move the linkage free of the handle. Remove bolts
(2) and cover (1).
Put identification on air lines (5) and disconnect
Remove three screws (6), bracket (7) and the
centershift lock control valve from the console.
Put the centershift lock control valve and bracket (7)
in position on console and install three screws (6).
Connect air lines to their correct location and install
cover (I) in position.
Put linkage (4) in position on the handle. Install the
pin (3) that holds it. Install cotter pin in pin.