ROLLOVER PROTECTIVE STRUCTURE (ROPS)
REMOVE ROLLOVER PROTECTIVE
Remove two angles (1) (one on each side) and
Remove six bolts and washers (2) that secure the
ROPS (three bolts are used on each side).
Remove two bolts (3) that secure the hydraulic
tank (4) to the canopy.
Support the ROPS with a suitable hoist and
remove mounting bolts, washers, lock washers,
mounts and nuts (5) which secure two support
assemblies (6). Remove the two supports (6) and
any shims that were used.
Remove the ROPS from the vehicle.
If vehicle is to be transported, install front. (7) and
rear (8) platform guard groups.