REMOTE CONTROL AIR PRESSURE
DISASSEMBLY AND ASSEMBLY
To adjust, raise the control console cover to access the
If the rear frame will not steer when using the remote
Loosen the locking nut and turn the
control, the air pressure regulator may need adjustment.
adjustment screw clockwise 1/4 turn. Reassemble the
control console and check to see if the rear frame will
steer. If not, repeat the procedure until the unit turns.
When proper steering is obtained, tighten the locking nut
on the regulator adjustment screw being careful not to
alter the adjustment. Reassemble the control console.