10. Put the center screen on top of the desiccant. Install
spring (20) and bottom screen (19) into the
cartridge. Install snap ring (18) on the center post
11. Install filter (21) into the cartridge.
NOTE: Make sure the filter is pushed down below groove
(22) for the snap ring.
12. Install retainer (24) on top of the filter and install
snap ring (23) into groove (22) of the cartridge.
13. Turn cartridge (15) over and install brace (25) as
14. Install the cartridge into housing (11).
NOTE: Push down and turn cartridge (15) to make sure
that O-ring (16) goes below the shoulder of housing (11).