REMOVE SWIVEL JOINT
Drain the oil from the hydraulic oil tank.
Put identification on all oil lines as to their location
on the swivel joint. Disconnect oil lines (1) and (2)
from the rear of the swivel joint.
Disconnect oil lines (5) and (6) from the front of the
Remove cotter pin (8) and the washer. Remove pin
(7) from the swivel joint.
Fasten a hoist to the swivel joint. Remove bolts (3)
that hold the swivel joint to the circle draw-bar.
Remove swivel joint (4). Weight is 75 lb. (34 kg).
INSTALL SWIVEL JOINT
Fasten a hoist to swivel joint (1). Put the swivel joint
in position on the circle drawbar. Install bolts (2) that
hold the swivel joint to the circle drawbar.
Put the guide assembly in position under the swivel
joint. Install pin (4) that holds the guide assembly to
the swivel joint. Install the washer and the cotter pin
on pin (4).
Connect oil lines (3) and (7) to their correct
locations on the front of the swivel joint.
Connect oil lines (5) and (6) to their correct
locations on the rear of the swivel joint.
Fill the hydraulic tank with oil to its correct level.