TRANSMISSION MAINTENANCE. (cont)
Planetary Group. (Sheet 4 of 6)
Install two 5/8-11NC eyebolts in
planetary housing (25, Figure
Weight of planetary housing
is approximately 560 lbs.
Use adequate hoist and sling
for lifting. Failure to
follow this procedure could
cause INJURY. If you are
injured, seek medical aid
Install hoist and sling on two
Rotate planetary housing (25) to
disengage parking brake lever
from clutch pack.
Remove planetary housing (25) and
place on three blocks. Make sure
planetary input gear is on top of
block. Refer to paragraph 14-4
Remove hoist and sling and two
Clean all parts. Refer to Chapter 2.
Inspect all parts. Refer to Chapter
Go to Sheet 5