HYDRAULIC SYSTEM MAINTENANCE. (cont)
Hydraulic Side Shift Cylinder. (Sheet 4 of 7)
Weight of cylinder is
approximately 130 lbs. Use
adequate hoist and sling for
lifting. Failure to follow
this procedure may cause
INJURY. If you are injured,
seek medical aid immediately.
21. Attach hoist and sling to
22. Using hoist and sling, remove
cylinder (38, Figure 10-144).
Support with floor jack.
23. Remove four bolts (39), washers
(40) and bracket (41, Figure
Clean all parts. Refer to Chapter 2.
Inspect all parts. Refer to Chapter
Go To Sheet 5