GENERAL MAINTENANCE INFORMATION.
Electrical System Components and Wiring.
Water-displacing corrosion preventive compound vapors can be harmful to eyes
and lungs. To avoid harm, keep the corrosion preventive away from heat, wear
protective goggles and use in a well-ventilated area.
Use water-displacing corrosion preventive compound MIL-C-81309, Type III,
Class 2 only, on internal connector surfaces.
Where possible, hold connectors with opening pointing slightly downward. Spray an even, thin film
of compound over the male pin area of the connector and into the female socket openings.
Use water-displacing corrosion preventive compound MIL-C-85054, Type I only,
on external connector surfaces.
After preserving connectors internally, assemble connectors. Wipe the outer surface of the
connector shell with a lint-free cloth dampened with cleaning compound MIL-C-81302. Spray a thin coating of water-
displacing corrosion preventive compound MIL-C-85054, Type I, on all external surfaces of the connector set. Make sure
the area where the connector set comes together is completely covered.
Wipe away excess spray with a lint-free cloth.
Cleaning compound can cause skin rash and can give off harmful vapors. To
avoid injury, use in a well-ventilated area. Wash immediately with soap and water
if compound gets on skin or clothing.
Electrical Maintenance/Repair Kit 12285360 contains instructions and tools
needed for repair and replacement of connectors, contacts and wires.