REAR AXLE MAINTENANCE.
Drive Sprockets. (Sheet 2 of 3)
The following is a mainte-
nance procedure for the right
side drive sprockets. The
maintenance procedure for the
left side drive sprockets is
Using spanner socket, remove nut
(1, Figure 5-123).
Remove two drive sprockets (2 and
3). Weight of two drive
sprockets (2 and 3) is 32 lbs.
Clean all parts. Refer to Chapter 2.
Inspect all parts. Refer to Chapter 2.
Install two drive sprockets (3
and 2, Figure 5-123) on drive
shaft of vehicle. Install inner
sprocket with hub away from final
drives. Install outer sprocket
with hub toward hub of inner
Go to Sheet 3