FUEL SYSTEM MAINTENANCE.
Fuel Injection Pump. (Sheet 4 of 16)
Weight on fuel injection pump
and governor is approximately
58 pounds. Use adequate
hoist and sling for lifting.
Failure to follow this
procedure could cause INJURY.
Attach hoist and sling to fuel
injection pump and governor
10. Remove bolts (8 and 9) from under
fuel injection pump and governor
11. Remove fuel injection pump and
governor. Pull back to separate
from front cover plate and lift
up from support.
12. Remove and discard preformed
packings (10 thru 13).
13. Remove governor assembly from
fuel injection pump. Refer to
14. Remove hoist and sling.
Remove four bolts (14), cover
(15) and gasket (16, Figure
3-86). Discard gasket (16).
Remove all gasket material from
Go to Sheet 5