FUEL SYSTEM MAINTENANCE. (cont)
Fuel Injection Nozzles. (Sheet 2 of 3)
The following is a mainte-
nance procedure for one
injection nozzle. The
maintenance procedure for the
remaining three injection
nozzles is identical.
Remove bolt and clamp from top of
cylinder head on engine (Figure
Do not apply more than 150
lb-in torque to remove fuel
Using nozzle puller and, if
necessary, nozzle puller adapter,
remove injection nozzle.
Cap nozzle to prevent contami-
nation if it is to be stored.
Clean all parts. Refer to Chapter 2.
Inspect all parts. Refer to Chapter
Go to Sheet 3