TANDEM DRIVE CHAIN ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Turn spindle wheel until master link of chain assembly
Remove and discard two cotter pins (16).
Use puller attachment and two legs to remove bar
Use puller attachment and two legs to remove link
Turn wheel spindle to left while pulling chain (17) out
of tandem housing (5).
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Drive chain weighs 50 lb (23 kg).
Remove chain (17) from tandem drive housing (5).