FLYWHEEL AND FLYWHEEL HOUSING REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Install two link brackets and 3/8-16-2B bolts on flywheel housing (6).
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Flywheel housing weighs 86 lb (40 kg).
Attach sling to link brackets.
Remove 13 bolts (7).
Remove flywheel housing (6), using sling.
Remove gasket (5) and discard.
Remove sling, two 3/8-16-2B bolts, and link brackets.
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.