SCARIFIER ACTUATING ASSEMBLY MAINTENANCE - CONTINUED
Steps 1 through 13 cover removal of the right scarifier actuating assembly. Follow these instructions for the
left scarifier actuating assembly.
Remove two bolts (4), washers (3), and spacer (2).
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Hydraulic cylinder weighs 51 lb (23 kg).
Support scarifier actuating assembly hydraulic cylinder (1) and drive pin (5) out.
Set free end of cylinder (1) on drawbar frame toolbox (6).